 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 16CTQ...S/16CTQ...-1 Series Vishay High Power Products Schottky Rectifier, 2 x 8 A 16CTQ...S 16CTQ...-1 FEATURES * 175 C TJ operation * Center tap configuration * Low forward voltage drop Base common cathode 2 Base common cathode 2 * High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance * High frequency operation * Guard ring for enhanced ruggedness and long term reliability * Designed and qualified for Q101 level 2 1 Common 3 Anode cathode Anode 2 1 Common 3 Anode cathode Anode DESCRIPTION This center tap Schottky rectifier series has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175 C junction temperature. Typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection. D2PAK TO-262 PRODUCT SUMMARY IF(AV) VR 2x8A 60 to 100 V MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) VRRM IFSM VF TJ tp = 5 s sine 8 Apk, TJ = 125 C (per leg) Range CHARACTERISTICS Rectangular waveform VALUES 16 60 to 100 850 0.58 - 55 to 175 UNITS A V A V C VOLTAGE RATINGS PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage SYMBOL VR VRWM 16CTQ060S 16CTQ060-1 60 16CTQ080S 16CTQ080-1 80 16CTQ100S 16CTQ100-1 100 UNITS V ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current See fig. 5 per leg IF(AV) per device 5 s sine or 3 s rect. pulse IFSM 10 ms sine or 6 ms rect. pulse EAS IAR Following any rated load condition and with rated VRRM applied 50 % duty cycle at TC = 148 C, rectangular waveform 16 850 A 275 7.50 0.50 mJ A SYMBOL TEST CONDITIONS VALUES 8 A UNITS Maximum peak one cycle non-repetitive surge current per leg See fig. 7 Non-repetitive avalanche energy per leg Repetitive avalanche current per leg TJ = 25 C, IAS = 0.50 A, L = 60 mH Current decaying linearly to zero in 1 s Frequency limited by TJ maximum VA = 1.5 x VR typical Document Number: 93949 Revision: 22-Aug-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 1 16CTQ...S/16CTQ...-1 Series Vishay High Power Products Schottky Rectifier, 2 x 8 A ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL 8A Maximum forward voltage drop per leg See fig. 1 VFM (1) 16 A 8A 16 A Maximum reverse leakage current per leg See fig. 2 Threshold voltage Forward slope resistance Maximum junction capacitance per leg Typical series inductance per leg Maximum voltage rate of change Note (1) Pulse width < 300 s, duty cycle < 2 % IRM (1) VF(TO) rt CT LS dV/dt TJ = 25 C TJ = 125 C TJ = TJ maximum VR = 5 VDC (test signal range 100 kHz to 1 MHz) 25 C Measured lead to lead 5 mm from package body Rated VR TEST CONDITIONS TJ = 25 C VALUES 0.72 0.88 0.58 0.69 0.55 7.0 0.415 11.07 500 8.0 10 000 mA V m pF nH V/s V UNITS TJ = 125 C VR = Rated VR THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range Maximum thermal resistance, junction to case per leg Maximum thermal resistance, junction to case per package Typical thermal resistance, case to heatsink Approximate weight minimum maximum SYMBOL TJ, TStg TEST CONDITIONS VALUES - 55 to 175 3.25 RthJC DC operation 1.63 RthCS Mounting surface, smooth and greased 0.50 2 0.07 6 (5) 12 (10) g oz. kgf * cm (lbf * in) C/W UNITS C Mounting torque 16CTQ060S Case style Marking device Case style TO-262 D2PAK 16CTQ080S 16CTQ100S 16CTQ060-1 16CTQ080-1 16CTQ100-1 www.vishay.com 2 For technical questions, contact: diodes-tech@vishay.com Document Number: 93949 Revision: 22-Aug-08 16CTQ...S/16CTQ...-1 Series Schottky Rectifier, 2 x 8 A Vishay High Power Products 1000 100 TJ = 175 C IF - Instantaneous Forward Current (A) IR - Reverse Current (mA) 10 1 0.1 0.01 TJ = 50 C 0.001 TJ = 25 C 0.0001 0 20 40 TJ = 150 C TJ = 125 C TJ = 100 C TJ = 75 C 100 10 TJ = 175 C TJ = 125 C TJ = 25 C 1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 60 80 100 VFM - Forward Voltage Drop (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics (Per Leg) 1000 VR - Reverse Voltage (V) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage (Per Leg) CT - Junction Capacitance (pF) TJ = 25 C 100 0 20 40 60 80 100 VR - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg) ZthJC - Thermal Impedance (C/W) 10 1 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 0.1 Single pulse (thermal resistance) 0.01 0.00001 0.0001 0.001 0.01 0.1 1 10 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg) Document Number: 93949 Revision: 22-Aug-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 3 16CTQ...S/16CTQ...-1 Series Vishay High Power Products Schottky Rectifier, 2 x 8 A 180 7 DC Allowable Case Temperature (C) 160 150 140 130 120 110 See note (1) 100 0 2 4 6 8 10 12 14 Square wave (D = 0.50) 80 % rated VR applied Average Power Loss (W) 170 6 5 4 3 2 1 0 0 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 RMS limit DC 2 4 6 8 10 12 IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current (Per Leg) IF(AV) - Average Forward Current (A) Fig. 6 - Forward Power Loss Characteristics (Per Leg) IFSM - Non-Repetitive Surge Current (A) 1000 At any rated load condition and with rated VRRM applied following surge 100 10 100 1000 10 000 tp - Square Wave Pulse Duration (s) Fig. 7 - Maximum Non-Repetitive Surge Current (Per Leg) L High-speed switch Freewheel diode 40HFL40S02 + Vd = 25 V D.U.T. IRFP460 Rg = 25 Current monitor Fig. 8 - Unclamped Inductive Test Circuit Note Formula used: TC = TJ - (Pd + PdREV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 80 % rated VR applied (1) www.vishay.com 4 For technical questions, contact: diodes-tech@vishay.com Document Number: 93949 Revision: 22-Aug-08 16CTQ...S/16CTQ...-1 Series Schottky Rectifier, 2 x 8 A Vishay High Power Products ORDERING INFORMATION TABLE Device code 16 1 1 2 3 4 5 6 7 - C 2 T 3 Q 4 100 5 S 6 TRL 7 8 Current rating (16 A) Circuit configuration C = Common cathode T = TO-220 Schottky "Q" series Voltage ratings S = D2PAK -1 = TO-262 060 = 60 V 080 = 80 V 100 = 100 V - None = Tube (50 pieces) TRL = Tape and reel (left oriented - for D2PAK only) TRR = Tape and reel (right oriented - for D2PAK only) 8 - None = Standard production PbF = Lead (Pb)-free LINKS TO RELATED DOCUMENTS Dimensions Part marking information Packaging information SPICE model http://www.vishay.com/doc?95014 http://www.vishay.com/doc?95008 http://www.vishay.com/doc?95032 http://www.vishay.com/doc?95279 Document Number: 93949 Revision: 22-Aug-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 5 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 |
Price & Availability of 16CTQ100-1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |